Apple Watch Not Charging After Being Dead? 9 Fast Solutions

Revive a dead Apple Watch battery

Co-authored by Rain Kengly

Last Updated: December 22, 2024 Fact Checked

It takes about 30 minutes for an Apple Watch to charge after it's dead. If your watch stays off for longer than that, it could indicate an issue with your charging cable or power source. Luckily, there are a few things you can try to turn your watch on again. Here's what to do if your Apple Watch is not charging after being dead for Series 4, 5, 6, 7, and 8.

Why Won't My Apple Watch Charge?

If you're trying to charge your Apple Watch after it's been dead for a while, it won't appear to start charging instantly. Leave it to charge for at least 30 minutes using an Apple-certified charging cable and working power outlet.

1

Let it charge for 30 minutes.

Download Article

A dead Apple Watch will take some time to boot up again. Usually, you'll see a green lightning bolt on the screen while it's charging, or a red lightning bolt if it needs charging. If you don't see these icons, or if it's stuck on the charging cable icon, leave it alone to charge for 30 minutes to an hour before checking again.^{[1]
X
Research source}
- If it turns on, consider disabling some features to improve its battery life.

2

Check the charging cable.

Download Article

Make sure you're using an Apple-certified charging cable. Some third-party cables are not compatible even if they say they are. Use the Apple Magnetic Charging Cable or USB-C Magnetic Fast Charging Cable that came in your Apple Watch box. If needed, you can order a new one from the Apple website.
- Also inspect both the end of the magnetic charger and the back side of your Apple Watch watch for any build-up or dirt preventing it from making contact. If you need to, you can wipe your Apple Watch and the charger clean with a soft, lint-free cloth.^{[2]
  X
  Research source}

3

Use a different outlet.

Download Article

Plug the cable into a different outlet. If you're using a wall outlet, try a different one. You can also charge an Apple Watch using a computer or laptop that's turned on, though it may take longer.
- Check that the charging cable is plugged all the way into the USB power adapter or device.

4

Force-restart your Apple Watch.

Download Article

Press and hold the side button and Digital Crown for 10 seconds. Hold the buttons simultaneously. This performs a force-restart.
- You should see the Apple logo. If you don't, let it charge for another 30 minutes, and then try to force-restart it again.

5

Remove any cases.

Download Article

Take off the case or accessories. A bulky case may prevent the charging cable from connecting properly.
- Additionally, remove any plastic covering that may have come with the watch or charging cable.

6

Make sure the magnets align properly.

Download Article

When the magnets are connected properly, you'll see the green charging lightning bolt. If the Apple Watch is completely dead, it may need to be manually held together until it turns on again.

7

Wipe down the charging cable and watch.

Download Article

Debris and dirt can build up on your watch. Clean both the back of your Apple Watch and the charger magnets with a dry, microfiber cloth.

8

Check for water damage.

Download Article

If your Apple Watch recently made contact with water or sweat, or was left in a moist environment, leave it alone to dry completely for a few hours. Then, try again.

9