PDF download Download Article
Follow this beginner-friendly guide to bleaching your hair at home with minimal damage
PDF download Download Article

Bleaching your hair can be an exciting way to give yourself a new, bold look. However, it comes with a price—damage. Whether you’re lightening blonde or dark hair, there are measures you can take to protect your hair from harsh chemicals. The best way to minimize damage is by using a deep conditioning treatment before and after bleaching. In this guide, we’ll teach you everything you need to know about safely bleaching and restoring your hair’s health.

Best Way to Bleach Hair with Minimal Damage

  1. Wash your hair 24-48 hours beforehand to allow natural hair oils to build.
  2. Divide your hair into four sections and clip the top sections out of the way.
  3. Mix 1 part powdered bleach and 2 parts low-volume developer in a plastic bowl.
  4. Apply bleach with an applicator brush from the tips to the roots to apply evenly.
  5. Let it sit for 20 to 45 minutes until you reach your desired shade.
  6. Rinse with neutralizing shampoo and warm water.
  7. Allow your hair to air dry and apply a deep condition mask.
Section 1 of 4:

Prepping Your Hair for Bleaching

PDF download Download Article
  1. Bleaching depletes your hair of moisture, so adding extra can help minimize damage. Purchase a deep conditioning mask and coat the entirety of your hair with the treatment. Let it sit for 30 minutes and rinse with cool water to close your hair’s cuticles and make it shiny.[1]
  2. Mix 1 part bleach powder and 2 parts developer before bleaching your hair. Apply a dab of the bleach on your skin and coat a strand of your hair. Let the bleach sit for 30 minutes, then rinse it off and check your results.[2]
    • Inspect the bleached strand to get an idea of your hair’s appearance afterward. You can adjust the processing time to get a lighter or darker shade if necessary.
    • If bleach irritates your skin, try shortening the processing time or look for alternatives, like permanent dyes.

    Warning: If your skin starts itching or burning, wash the bleach off immediately. If it continues, have a doctor examine your skin.

    Advertisement
  3. Natural oils help protect your scalp from bleach damage. Give your skin time for natural oils to develop by shampooing your hair 24-48 hours before you bleach it. Use a conditioner afterward to moisturize your hair.[3]
  4. Advertisement
Section 2 of 4:

How to Minimize Bleach Damage

PDF download Download Article
  1. When purchasing bleach, opt for high-quality ones that include additives that improve your hair quality while preserving its health. Read the label on your bleach and look for Brazilian Bond Builder, Olaplex, or ceramides.[4]
    • Avoid bleaches with boosters like ammonium persulfate or potassium persulfate. While they speed up the bleaching process, they can cause more harm.[5]
  2. Professional Hair Stylist Brianna Bowling recommends always starting with a 20-volume developer for at-home bleach jobs.[6] Low-volume developers produce weaker bleach, causing less damage. It may take longer to achieve your desired results with a 10- or 20-volume developer, but it'll help minimize the damage. Choose a bleaching kit with a low-volume developer, or purchase your bleach powder and volume developer separately to choose a low-volume developer.[7]
    • You can find a 10- or 20-volume developer at a beauty supply store or online.
  3. Removing the pigment from dark hair requires multiple bleaching sessions. Give your hair at least 3 weeks to give your hair cuticles enough time to heal, close, and lay flat again. During this time, use a deep conditioner daily to repair your hair.[8]
    • Repeated bleaching puts your hair at risk of overprocessing and breakage.
    • If you want to speed up the process, seek out the help of a professional hair colorist. Professionals have better bleaching formulas that may cause less damage. Similarly, they can advise you on the best way to get your desired results.[9]
  4. Unlike natural hair, which can easily be stripped of its color, dyed hair can make it harder for the bleach to lift color. As a result, your hair may look patchy. Use a color stripper, like Color Oops, to remove the dye. Then, go in with the bleach and shorten your processing time to 30 minutes or less to limit the damage.[10]
    • It’s best to see a professional colorist if you have dyed hair. They can advise you on striping hair dye and cover patches without causing more damage.

    Warning: If you've dyed your hair very dark, go to a professional stylist. Otherwise, you may damage your hair beyond repair.[11]

  5. Advertisement
Section 3 of 4:

How to Bleach Your Hair at Home

PDF download Download Article
  1. As you apply bleach to your hair, you may drip it onto your clothes and skin. To protect yourself, drape an old towel over your shoulders.[12] Bleach can irritate your skin and cause chemical burns, so slip on a pair of disposable gloves. Dip a gloved finger in coconut oil to apply along your hairline and ears as a protective barrier.[13]
    • Use baby oil or argan oil as a substitute.
    • Purchase a hairdresser’s cape if you don’t want to discolor old towels.
  2. Use 1 part bleach and 2 parts low-volume developer to lessen the strength of the bleach. Pour both ingredients into the mixing bowl. You may notice some bubbling as you stir the ingredients with a plastic brush applicator.[14]
    • 30- or 40-volume developer is recommended for dark brown or black hair. However, it’s best to stick to 20-volume to minimize damage.
    • Opt for blue or purple bleach powder to reduce the risk of brassiness afterward.
    • Always use a plastic bowl when handling bleach because bleach can react with metal.

    Tip: For an easy option, purchase a bleaching kit that contains both a bleaching powder and a developer/peroxide. These are sold at most beauty supply stores and online.

  3. Divide your hair into 4 sections to bleach your entire head evenly. Split your hair in half vertically, then in half horizontally to create 4 sections. Secure the top sections with plastic clips. Professional Hair Stylist Arthur Sebastian suggests having an adequate separation of each section to coat your hair evenly from tip to root. Apply bleach to one of the bottom sections, working from the ends up to the roots. Repeat the process for each section.[15]
    • If you have very thick hair, you might create 6 sections to make it easier to apply the bleach evenly.
    • Do your best not to get the bleach on your scalp. The bleach may burn or irritate your scalp if it gets on your skin.

    Warning: Always use plastic clips when bleaching your hair. Metal clips can react with the bleach and may damage your hair.

  4. Use a highlighting cap to do highlights, optional. Place a highlighting cap over your hair. Pull your hair through all of the holes or just some of them with a hook or comb, depending on how many highlights you want. Use your applicator brush to cover all of the exposed hair with bleach starting from the tips to the root.[16]
    • Applying bleach directly on the cap may seep through the holes and onto the rest of your hair, creating splotches.

    Variation: Clip your hair into 4 sections for all-over highlights or 2 sections for highlights only on the top of your hair. Let down the first section of hair, then use the end of a comb to separate a small piece to highlight. Place a piece of foil under the hair you want to bleach. Apply the bleach to the hair, then fold the foil up over it to protect the rest of your hair from the bleach. Work your way around your head until you have your desired amount of highlights.

  5. Bleach different sized pieces of hair for a balayage effect, optional. Clip the top part of your hair and start with the bottom section. Select a thin piece of hair and bring it over your shoulder. Use gloved fingers or an applicator brush to paint the bleach on the tips. Move to the other side of your head, pick up another wispy piece, and repeat. Alternate back and forth to create more natural-looking highlights. It’s okay for the bleached pieces to be different sizes.[17]
    • Cover the ends with aluminum foil to separate them before proceeding to the top part of your hair. Use the same method of application to complete the look.
  6. Bleach starts working immediately, but reaching your desired shade will take some time. Bleach can sit up to 45 minutes before rinsing to avoid overprocessing and breaking your hair. Check the color every 5 to 10 minutes to see how it’s progressing.[18]
    • Keep in mind bleach will cause less damage if it’s on your hair for the least amount of time.
    • If you’re unhappy with your results after 40 minutes, bleach it again in 3 weeks to avoid damaging your hair. Alternatively, you can speak to a professional colorist for assistance.
  7. Rinse out the bleach using cool water. Then, use your fingers to massage a quarter-size amount of mild or neutralizing shampoo to your hair. Use the tips of your fingers to remove any bleach from your scalp. Then, wash it under a stream of warm water.[19]
    • Make sure you remove all of the bleach from your hair. If necessary, shampoo your hair again to remove all the bleach.
    • Neutralizing shampoo helps balance the pH levels of your hair and scalp after bleaching to ensure your hair remains healthy, shiny, and free of damage.[20]
  8. If your bleach job has an unwanted yellow or golden tone, use toner to replace warm tones with cool, pure white tones. Combine equal parts toner and low-volume developer in an applicator bottle or mixing bowl. Use an applicator brush and apply it all over the hair. Rub it in and let it sit for 10 minutes. Rinse with water afterward.[21]
  9. After you bleach your hair, it’s best to avoid heat styling to prevent further damage. Allow your hair to air dry after washing the bleach and apply smoothing cream to minimize frizz.[22]

    Variation: If you must heat-style your hair, apply a heat protectant before you style it to minimize the damage to your hair. Then, blow dry it on low to medium heat.

  10. Advertisement
Section 4 of 4:

How to Take Care of Bleached Hair

PDF download Download Article
  1. Bleaching your hair removes the moisture, so it’s important to use a deep conditioner to repair it. For best results, coat your hair with a deep conditioning mask, then let it sit for 30 minutes. Rinse with cool water.[23]
    • Always rinse out conditioner with cool water because it closes your hair shaft, which gives you shinier hair.

    Tip: You don’t need to shampoo your hair every day. It’s okay to use your conditioning mask.

  2. Bond-repairing treatments are designed to repair your hair and leave it shiny. Look for products labeled bond-repairing. Apply a large dollop of the product to your hair, then comb the formula through your strands. Let the treatment set on your hair for at least 30 minutes. Then, shampoo your hair for softer, shinier hair.[24]
    • It’s best to leave the treatment on for several hours so it has more time to work. For instance, you might leave it on overnight. Just cover your hair with a sleeping cap.
    • Bond-repairing treatments are available over-the-counter and through a salon. While you'll get better results at a salon, home treatments may help you achieve healthier hair.
  3. It’s normal for blonde hair to get brassy or orange, but purple shampoo can neutralize the discoloration. Pick a purple shampoo designed for your shade of blonde. Use your purple shampoo once a week in place of your regular shampoo and rinse with cool water.
  4. It’s best to bleach your roots before they get too long so that you don’t get a noticeable shade difference. If you wait too long, you might need to bleach your entire head of hair to get a consistent blonde. Touch up your hair every 4 weeks if it grows quickly or every 6 weeks if your hair grows slowly.[25]
    • Try not to let your roots get more than about .75 in (1.9 cm) long.
  5. After bleaching your hair, you’ll likely end up with split ends. Leaving your split ends unattended to will cause your hair to continue to break, which means cutting off more inches in the long run. So, stay on top of your hair. Plus, regular trims prompt hair growth which means healthier hair.[26]
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you hide orange roots if you're bleaching blonde hair?
    Arthur Sebastian
    Arthur Sebastian
    Professional Hair Stylist
    Arthur Sebastian is a Professional Hair Stylist based in San Francisco, California. He is the Owner of Arthur Sebastian Hair Salon, a studio offering Hair Styling, Color & Brazilian Blowout services. Arthur has 30 years of experience styling hair. His career began with apprenticeships at Wayne’s Beauty College in Santa Cruz, California Miss Marty’s School of Beauty in San Francisco, California. After receiving his Cosmetology License in 1998, he rented his first station at Wack Shack Hair Salon in San Francisco, going on to hold positions at Posh Hair Salon, Acabello Hair Salon, and Red Union Salon before opening his own studio. With over 500 online customer reviews, Arthur Sebastian Hair Salon has a 5 star average rating on Yelp and 4.9 average review on Google.
    Arthur Sebastian
    Professional Hair Stylist
    Expert Answer
    So what you want to do is lift the orange roots and combine the bleach there, preferably in foils so you have an adequate separation in each section. Then, you lift the root from orange to blonde. I would suggest doing a shadow root just a half shade darker than the rest of your hair to create a color meld, which is a smooth separation between the roots and the rest of your hair.
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Reader Videos

Tips

  • There’s no way to bleach your hair without causing any damage. However, you may be able to minimize the damage.[27]
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

You Might Also Like

Bleach Your Hair With Hydrogen PeroxideBleach Your Hair With Hydrogen Peroxide
Choose Developer for Hair Color Choose a Hair Developer: Volume Strength, Application, & More
What Color Cancels Out Red HairWhat Color Neutralizes Red Tones in Hair? How to Cancel Out Red Hair Dye
Fix Hair That No Longer Holds ColorWhy Won’t My Hair Take Color Anymore? 7 Reasons & How to Fix It
Use Wella Toner Use Wella Toner after Bleach
Fix Purple Hair from TonerFix Purple Hair from Toner
Remove Semi Permanent Hair Dye in One DayThe Quickest & Most Effective Ways to Remove Semi-Permanent Hair Dye
Use Hair TonerUse Hair Toner
Prevent Hair Dye from Staining SkinPrevent Hair Dye from Staining Skin
Prevent Hair Color from BleedingPrevent Hair Color from Bleeding
Fix Yellow HairFix Yellow Hair
Fix Brassy Hair Color Remove Brassiness from Your Hair
Use Elumen Hair ColorUse Elumen Hair Color
Do a Strand Test Before Dyeing Your HairDo a Strand Test Before Dyeing Your Hair
Advertisement

About This Article

Arthur Sebastian
Co-authored by:
Professional Hair Stylist
This article was co-authored by Arthur Sebastian and by wikiHow staff writer, Mason Martinez, BA. Arthur Sebastian is a Professional Hair Stylist based in San Francisco, California. He is the Owner of Arthur Sebastian Hair Salon, a studio offering Hair Styling, Color & Brazilian Blowout services. Arthur has 30 years of experience styling hair. His career began with apprenticeships at Wayne’s Beauty College in Santa Cruz, California Miss Marty’s School of Beauty in San Francisco, California. After receiving his Cosmetology License in 1998, he rented his first station at Wack Shack Hair Salon in San Francisco, going on to hold positions at Posh Hair Salon, Acabello Hair Salon, and Red Union Salon before opening his own studio. With over 500 online customer reviews, Arthur Sebastian Hair Salon has a 5 star average rating on Yelp and 4.9 average review on Google. This article has been viewed 206,801 times.
3 votes - 100%
Co-authors: 8
Updated: June 24, 2024
Views: 206,801
Thanks to all authors for creating a page that has been read 206,801 times.

Reader Success Stories

  • Courtney Cross

    Courtney Cross

    Sep 23, 2020

    "This article helped me a lot when deciding what type of products I will need to minimize damage. However, I was..." more
Share your story

Did this article help you?

Advertisement