How to Calculate the Area of a Parallelogram

Co-authored by Taylor Klein

Last Updated: September 16, 2024 References

A parallelogram is a quadrilateral, or four-sided shape, with two sets of parallel sides. Squares, rectangles, and rhombuses are special types of parallelograms, though most people think of a "slanted" rectangle, with two diagonal sides and two flat sides, when they think of the parallelogram.^{[1]
X
Research source} No matter what the angle of the corners or the slant of the shape, it is easy to calculate the area of a parallelogram.

Method 1

Method 1 of 2:

Finding the Area of Two-Dimensional Parallelograms

Download Article

1
Multiply the base of the parallelogram by the height to find the area. If your problem gives you a measurement of the base and height of a parallelogram, simply multiply them to get your area. For example, if the base is 5, and the height 3, then your area is $15in^{2}$ , since $5*3=15$ $5*3=15$ .^{[2]
X
Research source}
- The base is the length of the long, flat side on the bottom.
- The height is the distance from the base straight up to its parallel side.
- Which side is the base and which is height is entirely up to you -- you could rotate any parallelogram to make any side the bottom and still get the same final answer.^{[3]
  X
  Research source}
2
Measure or record the length of the long, flat side, or base. A parallelogram consists of two sets of parallel lines, and one side is usually presented as the "bottom," making two of your sides appear flat. Measure this flat edge and write it down as the base, or "B."
- For this example, assume the base has a length of 10cm.
Advertisement
3
Draw a line straight up from the base to it's parallel side. This must be a 90-degree angle so that your measurement for the height is perpendicular to the base. The easiest way to get this is to measure from the bottom corner straight up, using a ruler to line everything up.
- You do not measure the height by measuring the slanted sides.^{[4]
  X
  Research source}
4
Measure the distance between your base and the top of the parallelogram for height. As long as your line is perpendicular (at a 90-degree angle to the base, this is your height. Write it down for "H."
- For this example, assume that the height is 5cm.
- The height may be drawn outside of the parallelogram.
5
Multiply the base by the height to find the area. Once you've got your two measurements, simply add them to the equation $A=B*H$ $A=B*H$ , where A stands for your area. Finishing the work:^{[5]
X
Research source}
- $A=B*H$ $A=B*H$
  - $B=10cm;H=5cm$
- $A=10cm*5cm$
- Area of Parallelogram $=50cm^{2}$ ^{[6]
  X
  Research source}
6
Always add "units squared" at the end of your problem for the correct answer. In the previous example, you could leave the answer as "5." But this doesn't actually tell you how big the parallelogram is -- inches, miles, centimeters, etc. Since area is a measure of space, you need to tell the reader, teacher, or client how much space you measured. Since the problem above used centimeters, the final answer was "centimeters squared." This means that the parallelogram could fit "five perfect 1-centimeter squares" inside of it.^{[7]
X
Research source}
- Simply square the units used to measure to get your answer. If you measured base and height in meters, your final answer would be in "meters squared," or " $m^{2}$ "
- If you have no measurements given, provide your answer in " $units^{2}$ ."^{[8]
  X
  Research source}

Method 2

Method 2 of 2:

Finding the Surface Area Parallelepipeds

Download Article

1
Treat a three-dimensional parallelogram just link any other surface area problem. Three-dimensional parallelograms also called "parallelepipeds," are as easy to solve as any other 3D rectangle. Simply find your three measurements-- length (l), height (h), and width (w), and then input them into the following formula:^{[9]
X
Research source}
- Lateral Surface Area = $2(lh+lw+hw)$
2
Find length and height of one side of the prism. If you've got a rectangular solid (a math term for a box) where one of the sides is a parallelogram, you can measure the length and height the exact same way as when you measured the length and height for a 2D parallelogram. Remember that these two measurements must be perpendicular, meaning they must form a right-angle, for the measurements to be correct. When done, write down these measurements as length and height.^{[10]
X
Research source}
- Remember -- the height is not the length of the diagonal side -- it is the distance between the side you measured for length and its parallel side.
- For this example, say that $l=6;h=4$ , and that you measured in inches.
3
Find the width by measuring a side that is moving away from your length and height sides. This is the last distance you haven't measured. Just make sure that you don't re-measure a side that is parallel to your length or height -- the width should be a distinct measurement. You should be able to take all three measurements from the exact same point, with each line perpendicular to each other line.^{[11]
X
Research source}
- For this example, say that the width is $w=5in$ .
4
Add all three of your measurements to the formula to get your surface area. Once you've measured all three sides, or if the problem gives them to you. then you're ready to finally solve. Simply input it all into the formula:^{[12]
X
Research source}
- Lateral Surface Area $=2(lh+lw+hw)$ $=2(lh+lw+hw)$
  - $l=6in;h=4in;w=5in$
- Lateral Surface Area $=2(6*4+6*5+4*5)$
- Lateral Surface Area $=2(24+30+20)$
- Lateral Surface Area $=2(74)$
- Lateral Surface Area $=148in^{2}$
5
Always add "units squared" to your final answer to indicate your measurements. Again, remember that "148" means nothing if you don't know if it measures inches, feet, or kilometers. Surface area is obviously another form of area, meaning it requires "units squared" even though you're measuring a 3D object. For the example, the prior problem would be in "inches squared."^{[13]
X
Research source}
- If you forget which units to use, simply look at the original problem. Remember that $3^{2}$ is really just a way to write out $3*3$ . In your problem, you multiply measurements, like $A=3ft*3ft$ . Just like you could say that the area is $3^{2}$ , you also say the units are $ft^{2}$ .^{[14]
  X
  Research source}

Calculator, Practice Problems, and Answers

Sample Parallelogram Area Calculator

Sample Calculating the Area of a Parallelogram Practice Problems

Sample Calculating the Area of a Parallelogram Practice Answers

Expert Q&A

Search

Add New Question

Question

How do I know if the two lines are parallel?

Taylor Klein
Advanced Math Teacher
Taylor Klein is an Advanced Math Teacher based in Philadelphia, Pennsylvania. She has worked in the education field for over 10 years, including eight years as a middle school Advanced Math Teacher. She has a master’s degree in Instructional Technology and Design and a master’s degree in Educational Leadership and Administration.

Taylor Klein

Advanced Math Teacher

Expert Answer

To determine the parallelism of two lines, it is necessary to calculate the slope of each line, which is defined as the ratio of the vertical change (rise) to the horizontal change (run). If the slopes of two lines are identical, then the lines are parallel.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 0 Helpful 2
Question

How do I find base in a parallelogram?

Donagan

Top Answerer

Divide the area by the height.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 13 Helpful 17
Question

How do I find base?

Donagan

Top Answerer

Divide the area by the height.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 12 Helpful 11

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

To test your skills, and a famous proof, draw a diagonal line between two of the corners of the parallelogram. Then draw a cross anywhere in the shape, making sure the two lines are both parallel to the sides of the parallelogram as well. This will create two squares inside your parallelogram. The proof? No matter where you draw this line, these squares will always have the same exact area.^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0