How to Change the Computer Time and Date Using the Command Prompt

Written by Jack Lloyd

Last Updated: June 21, 2024 Tested

This wikiHow teaches you how to change your time and date on a computer running the Windows operating system using the Command Prompt app.

Using Command Prompt to Change Time & Date

Go to Time & Language in your Settings app.
Click Date & time and switch off “Set time automatically.”
Type “command prompt” into your Start menu and double-click to open the program.
Click Run as administrator and allow the app to make changes to your device.
Change the time by typing the command “time HH:MM:SS AM/PM.”
Change the date by typing the command “date” → Enter → “MM-DD-YYYY.”

Part 1

Part 1 of 2:

Disabling Automatic Time and Date

Download Article

1
Understand why this is necessary. While you can change your computer's time and date with Command Prompt while your computer's automatic time and date is active, your computer will eventually reset its time and date to match the current one.
- In some cases, your computer will reset the time and date as soon as you close Command Prompt.
Click the Windows logo in the bottom-left corner of the screen.

Advertisement
Click the gear-shaped icon in the lower-left corner of the Start window. This will prompt the Settings window to appear.
This option is in the middle of the Settings window.
It's a tab in the upper-left side of the window.
The switch will turn grey
, indicating that Windows will no longer attempt to reset the time and date automatically. At this point, you're free to change your computer's time and date in Command Prompt.

Part 2

Part 2 of 2:

Changing the Time and Date

Download Article

Click the Windows logo in the bottom-left corner of the screen. The Start menu will pop up.
Type in command prompt, then wait for Command Prompt to appear at the top of the Start menu.
3
Right-click
Command Prompt. It's at the top of the Start menu. A drop-down menu will appear.
- If your mouse doesn't have a right-click button, click the right side of the mouse, or use two fingers to click the mouse.
- If your computer uses a trackpad instead of a mouse, use two fingers to tap the trackpad or press the bottom-right side of the trackpad.
4
Click Run as administrator. This option is in the drop-down menu.
- You can't change your computer's time and date without administrator privileges.
Doing so confirms that you want to open Command Prompt; you should see the Command Prompt window appear at this point.
6
Change the time. The command for changing time in Command Prompt is time HH:MM:SS AM/PM where "HH:MM:SS" refers to the hour, minute, and second, and "AM/PM" refers to whether it's morning or afternoon. To change your computer's time, type in this command with your preferred time indicated, then press ↵ Enter.
- For example, typing in time 08:35:00 AM and pressing ↵ Enter would change your computer's time to 8:35 AM.
- To change the time to 10:00 PM, you would type in time 10:00:00 PM and press ↵ Enter.
- If you're comfortable with 24-hour time, you can type in your preferred time (e.g., 14:00:00 for 2:00 PM) and leave off the "AM" or "PM" tag.
7
Change the date. The date format you'll use in Command Prompt depends on your country, but Command Prompt will tell you which format to use: type in date and press ↵ Enter, then type in the date you want to use in whichever format is specified by Command Prompt (e.g., "mm-dd-yyyy" in the United States) and press ↵ Enter.
- To change a United States computer's date to September 25th, 2018, you would type in date and press ↵ Enter, then type in 09-25-2018 and press ↵ Enter.
- To adjust the date to read October 12th, 2018 on a European computer, you would type in date and press ↵ Enter, then enter either 12-10-2018 or 2018-10-12 depending on your location.
8
Review your computer's time and date. In the bottom-right corner of the screen, you should see both your updated time and your updated date reflected in your region's format.
- If you use 24-hour time, you won't see "AM" or "PM" listed here.

Community Q&A

Search

Add New Question

Question

I tried to change the time on my computer by using the command prompt, but it didn't work. What can I do?

Community Answer

Try right clicking on the CMD icon and selecting "Run as administrator." Then follow the instructions again.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 19 Helpful 8
Question

Can I change system time without administrator privileges?

JLloyd

Community Answer

Unfortunately, you can't—attempting to change the time and/or date without using Command Prompt in administrator mode will result in an error.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 8
Question

What if I want to set date and time settings as automatic so that it fetches the date and time from the internet?

JLloyd

Community Answer

Your computer already does this by default. If you turned off the automatic time and date setting, you can re-enable it from within Windows Settings by opening the Time & Language menu and clicking the "Off" switch next to the "Set time automatically" heading.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 4

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

As long as you leave the automatic time and date feature disabled, your new time and date won't change back when you restart your computer.

Thanks
Helpful 0 Not Helpful 0