This article was reviewed by Grace Imson, MA and by wikiHow staff writer, Devin McSween. Grace Imson is a math teacher with over 40 years of teaching experience. Grace is currently a math instructor at the City College of San Francisco and was previously in the Math Department at Saint Louis University. She has taught math at the elementary, middle, high school, and college levels. She has an MA in Education, specializing in Administration and Supervision from Saint Louis University.
There are 11 references cited in this article, which can be found at the bottom of the page.
This article has been fact-checked, ensuring the accuracy of any cited facts and confirming the authority of its sources.
This article has been viewed 390,441 times.
You just learned about inflection points in calculus and now you’ve got a bunch of math problems asking you to find them. You’ve got a function and a graph, so where do you go from there? With our help and a bit of derivative magic, finding a function’s inflection points is actually pretty easy! In this article, we’ll provide you with all the steps you need to find and check points of inflection. As a bonus, we’ll show you how to use your scientific calculator to calculate points of inflection for you. If you’re ready to solve your math problems, read on!
Things You Should Know
- An inflection point is where a function changes concavity and where the second derivative of the function changes signs.
- Take the first and second derivative of the function using the power rule.
- Set the second derivative equal to 0 to find the candidate, or possible, inflection points.
- Plug in a value greater than and less than the candidate point to see if the second derivative changes signs at the point.
Steps
-
Learn the difference between convex and concave. To understand inflection points, you need to understand when a function is convex or concave on a graph. Many functions have both convex and concave intervals, with an inflection point existing where a function changes convexity/concavity. Luckily, convex and concave are easy to distinguish based on what they look like.
- A concave function is shaped like a hill or an upside-down U. It’s a function where the slope is decreasing. When it’s graphed, no line segment that joins 2 points on its graph ever goes above the curve.
- A convex function, on the other hand, is shaped like a U. It’s a function where the slope is increasing. No line segment that joins 2 points on its graph ever goes below the curve.
- In the graph above, the red curve is convex, while the green curve is concave.
-
Identify the roots of a function. A root of a function is the point where the function equals zero, or where the function intersects the x-axis. In the graph above, the roots of the green parabola are at and [1]
- A function can also have more than 1 root.
Advertisement -
Find an inflection point where a function changes concavity. Remember how there’s a difference between convex and concave? An inflection point is a point on a function where its shape changes, either from convex to concave, or opposite. It is also the point where the second derivative of the function changes signs from positive to negative or negative to positive, thus being equal 0. For a point to be the point of inflection, it has to both switch convexity/concavity and change signs on the second derivative.[2]
- To find the inflection point on a graph, look for the point where the function switches concavity. On the graph above, it’s the middle point where the function changes from concave to convex.
-
Take the first derivative of the given function. You’ll need your function's second derivative to find your inflection points. Before you get the second derivative, you have to find the first derivative of the function. First derivatives are denoted as or . To solve your function’s first derivative, use the power rule. Multiply x by its exponent and then reduce the exponent by 1.[3]
- For example, find the inflection point of the function below.
- Use the power rule to find the first derivative.
- The derivatives of basic functions are usually found in most calculus textbooks; you need to learn how to find basic derivatives before moving on to more complex functions.
- For example, find the inflection point of the function below.
-
Differentiate the function again to get the second derivative. The second derivative is the derivative of the first derivative. It is denoted as or Simply use the power rule again to get the second derivative.
- Find the second derivative of
-
Set f’’(x) equal to 0 to find the candidate inflection points. Solving f’’(x) = 0 only gives you the candidate inflection points. These are the x-values of the possible inflection points for the function. You still need to test the points on the second derivative to make sure it changes concavity, or switches its sign from positive to negative or negative to positive.
- Set equal to 0.
-
Plug a value higher and lower than the inflection point into f’’(x). To check if the second derivative changes signs, select 1 value that is greater than the candidate point and 1 value that is less than it. Then, plug each value into the second derivative. If the sign of the second derivative is different for both values, the candidate inflection point is an inflection point. If the sign doesn’t change, the candidate point is not an inflection point.
- In our example function of , the second derivative is and the candidate inflection point is
- Choose a value where and For this example, we’ll use and as test values.
- Plug into
- Plug into
- changes signs when you plug in a lower and a higher than Therefore, is an inflection point of the function
- In our example function of , the second derivative is and the candidate inflection point is
-
Substitute the inflection point into the original function to get its y-value. While you now know the x-value of the inflection point, you don’t know where it is on the y-axis. Simply go back to the original function and plug in the inflection point to get its y-value.
- The original function is and the inflection point is
- The original function is and the inflection point is
-
Evaluate the function to find the inflection point’s coordinates. The coordinate of the inflection point is denoted as In our example, the coordinates of the inflection point are
-
Check the concavity of every candidate inflection point. Oftentimes, people assume there’s no inflection point when the candidate point is . However, this isn’t true. Remember, 0 can be graphed, so if you get 0 as your candidate point, it might be an inflection point.
- For example, if you get a candidate inflection point where make subintervals at and If the sign changes for the test values you choose at each interval, the inflection point is at 0.
- If you have inflection points at and you test the x values at and Plugging in your test values into the second derivative at each interval tells you if both AND are inflection points.
-
Include candidate points where the derivative is undefined. When you find possible inflection points, you have to look for instances where the second derivative equals 0 and where the second derivative is undefined. If you only look for points where the second derivative is 0, you might miss inflection points where the function is undefined.[4]
-
Analyze the second derivative, not the first one. When you’re finding inflection points, you only consider the second derivative. If you set the first derivative equal to 0, your answer will give you extremum points instead.[5]
- For example, if you are finding whether or not has an inflection point, you consider , NOT . This is because is the second derivative, while is the relative minimum point (which you aren’t looking for here).
-
Head to your “Plots” function on your calculator. It’s easy to use a scientific calculator to find inflection points. On most scientific calculators, just press the “diamond” or the “second” button, then click F1. This takes you to your Y plots where you can enter up to 7 functions.[6]
- This is true on both the TI-84 and the TI-89, but it may not be the exact same on older models.
-
Enter the function into y1. Clear out any remaining functions you had in your y plots. Then, type in the function after the equal sign. Remember to keep any parentheses involved in the function so your answer is correct.[7]
- For example, the function might be
-
Click “graph.” On most calculators, you press the “diamond” or “second” button then click F3. If you have to adjust your window on the calculator, hit “diamond” or “second” and press F2. Then, select “standard zoom.”[8]
- Don’t worry if your screen doesn’t show the whole graph just yet—you will adjust the zoom later.
-
Adjust the window until you see the whole graph. When you open up the graphing window, you might not see the entire curve of your graph. If that’s the case, click the “diamond” or “second” button, then open up F2 for zoom again. Simply increase or decrease your minimum and maximum axis to get the graph to fit inside the window.[9]
- It might take a little adjustment and back-and-forth to find your graph.
-
Click “Math,” then “Inflection.” Hit the “diamond” or “second” button, then select F5 to open up “Math.” In the dropdown menu, select the option that says “Inflection.”[10]
- This is—you guessed it—how to tell your calculator to calculate inflection points.
-
Place the cursor on the lower and upper bound of the inflection. Your calculator will give you a message saying “Lower?” Move the arrows on your calculator until the cursor is to the left of the inflection point. Then, your calculator will ask “Upper?” Move your cursor so it’s to the right of the inflection point. To get your inflection point, hit “Enter.”[11]
- This is how you get your calculator to guess where the inflection point is. Now you have your answer!
Community Q&A
-
QuestionWhat if the second derivative intersects with the x-axis, but does not dip below it?wikiHow Staff EditorThis answer was written by one of our trained team of researchers who validated it for accuracy and comprehensiveness.
Staff AnswerwikiHow Staff EditorStaff AnswerThe second derivative has to cross the x-axis for there to be an inflection point. If the second derivative only touches the x-axis but doesn't cross it, there's no inflection point. -
QuestionWhat if the second derivative is a constant? How do I find the inflection point?Community AnswerInflection points are where the second derivative changes sign. If it is constant, it never changes sign, so there exists no inflection point for the function.
-
QuestionCan the first derivative become zero at an inflection point?OrangejewsCommunity AnswerYes, for example x^3. It changes concavity at x=0, and the first derivative is 0 there.
Video
Tips
-
Alternatively, take the third derivative of a function to find the inflection points. If the third derivative does not equal 0, there is an inflection point. If the third derivative is positive, the inflection point is increasing; if it’s negative, the point is decreasing.[12] However, taking such derivatives with more complicated expressions is often not desirable.Thanks
-
All linear functions have no inflection points. This is because linear functions do not change slope (the entire graph has the same slope), so there is no point at which the slope changes.Thanks
-
When you’re testing the candidate points, you are only looking for a sign change. You are not actually evaluating the value.Thanks
References
- ↑ http://www.easy-math.net/root-of-a-function/
- ↑ https://tutorial.math.lamar.edu/classes/calci/shapeofgraphptii.aspx
- ↑ https://www.mathsisfun.com/calculus/inflection-points.html
- ↑ https://faculty.ung.edu/mkim/Teaching/Math%202040/Project/Higher%20Derivatives,%20Concavity,%20and%20the%20Second%20Derivative%20Test%20.pdf
- ↑ https://www.math.ucdavis.edu/~kouba/CalcOneDIRECTORY/graphingdirectory/Graphing.html
- ↑ https://www.youtube.com/watch?v=OeD3_Es4J54&feature=youtu.be&t=15
- ↑ https://www.youtube.com/watch?v=OeD3_Es4J54&feature=youtu.be&t=32
- ↑ https://www.youtube.com/watch?v=OeD3_Es4J54&feature=youtu.be&t=32
- ↑ https://www.youtube.com/watch?v=OeD3_Es4J54&feature=youtu.be&t=81
About This Article
To find inflection points, start by differentiating your function to find the derivatives. Then, find the second derivative, or the derivative of the derivative, by differentiating again. To locate a possible inflection point, set the second derivative equal to zero, and solve the equation. Finally, find the inflection point by checking if the second derivative changes sign at the candidate point, and substitute back into the original function. For more tips on finding inflection points, like understanding concave up and down functions, read on!
Reader Success Stories
-
"Here is what helped me: If the sign of the second derivative changes as you pass through the candidate inflection point, then there exists an inflection point. If the sign does not change, then there exists no inflection point. Thanks for that."..." more