How to Hem a Skirt

Co-authored by Essie Karimi

Last Updated: November 26, 2024 Fact Checked

Whether you're making a new skirt or you just cut one of your existing skirts shorter, you'll need to hem the bottom edge. But how? Don't worry! It's actually surprisingly easy, and we'll walk you through what to do step-by-step. Follow the step below, and soon your beautiful skirt will be ready to wear.

Best Way to Hem a Skirt

Measure and mark the desired hemline on the fabric with chalk.
Cut along the line you drew to remove the excess fabric.
Fold the hem down ½ inch, secure it with pins, and iron the fold.
Fold the hem down another 1½ inches, pin it, and iron again.
Sew along the fold close to the folded edge to create the hem.

Method 1

Method 1 of 2:

Hemming a Standard Skirt

Download Article

You will need this extra length for the hem. If your skirt has a lining, and you need to hem it as well, plan on having it 1 inch (2.54 centimeters) shorter than the finished skirt.
Consider using a hem gauge to measure upward from the hem while you draw the line. This will ensure that you will be cutting an equal amount off all around the skirt. If you don't have a hem gauge, you can use a ruler or measuring tape instead.

Advertisement
If your skirt has a lining, cut the lining 1 inch (2.54 centimeters) shorter.
4
Fold the hem down by ½ inch (1.27 centimeters), secure it with sewing pins, then press it with an iron. Be sure that you are folding towards the wrong size of the fabric (inside the skirt). If you have a serger, or if your serving machine has an overlock stitch, you can skip the folding and use that instead. When you are done, remove the sewing pins.
- Pressing the hem with an iron helps smooth out the fabric so that it's easier to sew.
Fold the hem down by another 1½ inches (3.81 centimeters), secure it with sewing pins, then press it flat with an iron again. If you are sewing a skirt lining, fold it down by ½ inch (1.27 centimeters) instead.cKeep the pins in place.
6
Consider sewing the hem down using a sewing machine. Try to get as close to the folded edge as you can. About 1/16 to 1/8 of an inch (0.16 to 0.32 centimeters) will be enough.
- Use a thread color that closely matches your fabric.
- This is ideal for those who are working with skirt linings and thinner materials.
7
Consider blind stitching the hem. Thread a needle, and tie a knot at the end of the thread. Use the needle to pull the thread through the hem. Catch 1 to 2 threads from the skirt material, then bring the needle back into the hem. Pull the needle ¼ inch (0.63 centimeters) through the hem, then use it to catch 1 to 2 threads from the skirt material again. Keep blind stitching until the hem is all sewn up. Knot the end of the thread, and snip the rest off. ^{[1]
X
Research source}
- Use a thread color that closely matches your fabric.
- This is great for those working with a heavier or thicker material.
After this, your skirt is now ready to wear.

Method 2

Method 2 of 2:

Hemming a Circle Skirt

Download Article

You will need this extra fabric to make the hem. If you are going to be hemming a skirt lining, plan on making it 1 inch (2.54 centimeters) shorter than the finished skirt.
2
Draw a line around the skirt where you need to cut it, then cut along that line. Consider using a hem gauge to measure up from the bottom of the skirt to the cutting point. This will help ensure that you are cutting an even amount off all along the hem. If you don't have a hem gauge, you can use a measuring tape or ruler instead.
- If you are cutting a skirt lining, cut it 1 inch (2.54 centimeters) shorter than the skirt itself.
3
Using a sewing machine, straight stitch a line ¼ inch (0.63 centimeters) away from the cut edge. Try to use a higher thread tension for this. This will help make the hem easier to fold later on. It will also create a sort of guideline for you, so you won't have to make as many measurements.^{[2]
X
Research source}
- Use a thread color that closely matches your fabric.
Lift the iron up and down as you press; do not move it side to side. You should have a ¼ inch (0.63 centimeters) wide hem inside your skirt at this point.
Because the folding takes up some excess fabric, your hem will be about 5/8 inch (1.59 centimeters), as opposed to an exact ½ inch (1.27 centimeters).^{[3]
X
Research source}
6
Stitch the hem down, 1/8 inch (0.32 centimeters) from the top folded edge. If your sewing machine has an edge stitching foot attachment, consider using that instead.^{[4]
X
Research source} The edge stitching foot is often labeled as a #5 foot.
- Use a thread color that closely matches your fabric.
After this, your skirt is ready to wear.

Video

Community Q&A

Search

Add New Question

Question

How do I know whether my skirt is a circle skirt or a standard skirt?

Community Answer

A circle skirt is really big at the hem, and when you lay it out flat, it would look like a circle.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 4 Helpful 10

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Let your skirt hang a few days before you hem it. This will allow the fabric to stretch with the direction it drapes in.^{[5]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
If you can, wash, dry, and iron your skirt to remove any potential shrinking and wrinkles. The one exception to this is if your skirt is not machine washable.

Thanks
Helpful 4 Not Helpful 3