How to Make Gold from Mercury

Author Info

Last Updated: October 26, 2024

For many years, alchemists searched for a method to produce gold. Recently, with the advent of nuclear technology, this process has actually become possible. Mercury is relatively easy to turn into gold, so it will be used as the starting material. This method is not a terribly practical or economically viable way to go about making gold, but if you're interested in how it works, you can learn the science behind the process.

Steps

Download Article

1
Gather the equipment. To turn mercury into gold, you will need the following:
- Mercury (duh....). Get as much as you can, because it's not very efficient.
- A neutron source. Ideally you need a particle accelerator (or a nuclear reactor).
- A neutron moderator. Water (yes, the stuff out of a tap) works pretty well.
- Neutron shielding, reflecting and collimating equipment
- Nitric acid
The neutrons from the source need to pass through the collimator (a thing that makes them go in straight lines) and the moderator (something that slows them down so that they react better) and finally into the mercury. Set up the neutron reflectors around the mercury (so that any escaping neutrons are reflected back) and then surround the whole thing with shielding.

Advertisement
Ideally, you want to hit the mercury with a short, very intense burst of neutron radiation.
4
Understand the science! Here's what's happening:
- Ordinary mercury contains seven isotopes: Hg-196, Hg-198, Hg-199, Hg-200, Hg-201, Hg-202 and Hg-204.
- When it absorbs a neutron, Hg-196 becomes Hg-197. Hg-197 decays into gold.
- As a by-product, Hg-202 and Hg-204 become Hg-203 and Hg-205, which decay into thallium.
- Other isotopes change into each other and remain mercury.

1
Wait. After the neutron burst, the reaction that produces gold has a half-life of 64.14 hours. If you wait this long, half of the Hg-197 will have become gold.
- Proton plus Hg-200 is one unfavorable (due to high positive nuclei charge and repulsion charge), yet with a possible alternate pathway.
After the reaction, the mixture should largely contain mercury, with some thallium isotopes, and gold. Nitric acid will dissolve mercury and thallium, but not gold.
3
Filter off the mercury and thallium nitrates. You should be left with gold.
- And now for the bad news: Though Hg-196, the isotope is readily converted to gold as Hg-196 readily absorbs neutrons, it only comprises 0.15% of natural mercury left. Assuming perfect conversion to Hg-197, then after one half-life (half of the Hg-197 decays), a kilogram of mercury will give you... 0.73 grams of gold. That's right, you get less than three-quarters of a gram of gold per kilo of mercury.
- To further increase gold yields and make better use of mercury, you can try to hit a isotope specific mix of Hg-198, Hg-199 (together 27% of all mercury) with high energy protons, kicking out neutrons. Yet this is an extremely inefficient process. Keep doing it until finally to converted to Hg-197, then wait just as above for decay to Au-197 or gold. Repeat nitrate steps

Community Q&A

Search

Add New Question

Question

You folks have a wonderful sense of humor. Or, are you serious?

TomPN

Top Answerer

This is a serious method of making gold from mercury. However, as stated, it isn't economically viable. A similar process is used to make other artificial elements, such as plutonium, californium, ununoctium, etc.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 13 Helpful 54
Question

Isn't mercury poisonous?

Community Answer

Mercury is a very toxic or poisonous substance that people can be exposed to in several ways. If it is swallowed, like from a broken thermometer, it mostly passes through your body and very little is absorbed. If you touch it, a small amount may pass through your skin, but not usually enough to harm you.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 33 Helpful 15
Question

Where do I acquire a particle accelerator?

Mr c

Top Answerer

Acquiring a particle accelerator is a complex process and typically requires significant resources and expertise. These devices are large, expensive, and highly specialized equipment that are usually owned and operated by research institutions, universities, or national laboratories. If you're interested in using a particle accelerator for research or other purposes, you may need to collaborate with or gain access to a facility that already has one. Contacting research institutions or universities with particle accelerator facilities would be a good starting point to inquire about access or collaboration opportunities.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 4

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Put the spare mercury back in the accelerator and go again! You won't get much more gold, but eventually all of the mercury isotopes will be converted to thallium, which you can sell - and at $400-$500 per kilo, you get quite a bit for it. Thallium is very toxic but with proper handling can be prepared.

Thanks
Helpful 0 Not Helpful 0
Both high energy protons and slow/thermal neutrons can both produce and damage gold, either converting some gold back into mercury, or leaving a fraction of the gold as platinum (Pt-196) instead.

Thanks
Helpful 1 Not Helpful 0

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

This method deals with sources of radiation. Check to make sure you're allowed to use them, and handle them at the largest reasonable distance. If at all possible, use a robot to manipulate them.

Thanks
Helpful 16 Not Helpful 4
This method can be used to make other materials, such as making technetium (a medical tracer) from molybdenum. Whatever you do, do not put uranium in the accelerator, as it will be converted to plutonium - which you really don't want lying around your place.

Thanks
Helpful 9 Not Helpful 4
Assume all chemicals are toxic, corrosive, and flammable.

Thanks
Helpful 5 Not Helpful 2
This method is not economically viable. You have to pay for the mercury (expensive), the neutron source (very expensive), the particle accelerator (ridiculously expensive), electricity and coolant for the accelerator (also ridiculously expensive), and all of the shielding (expensive and vital, if you don't want to die). After all of this, it hardly seems worth it, doesn't it?

Thanks
Helpful 6 Not Helpful 3