PDF download Download Article
A step-by-step guide to making thermite at home, complete with safety information
PDF download Download Article

Of all the do-it-yourself chemistry experiments found online, there’s almost nothing cooler—or maybe hotter—than a thermite reaction. With a fire that reaches 2,200 °C (3,990 °F), this simple mixture of rust and aluminum powder burns hot enough to turn rocks into lava. Thermite is famously used for welding since it produces molten iron as a byproduct, though it has tons of other applications too. Though you can make thermite yourself with the right preparation and safety gear, remember that it is extremely dangerous and should only be done in a lab.

Things You Should Know

  • Thermite is a 1:3 mixture (by mass) of metallic aluminum and iron oxide. It burns at 2,200°C (3,990 °F), producing molten iron, and is often used for welding.[1]
  • Making thermite is extremely dangerous. Take safety precautions like wearing a welding mask, fireproof apron, and protective clothing.
  • To make thermite, combine powdered iron oxide and aluminum powder in a ceramic container. Insert a magnesium strip into the mixture, light it, and stand back.
  • Do not attempt to extinguish burning thermite with water. Let it burn out. Never remove your safety gear when working with thermite.[2]
Part 1
Part 1 of 2:

Safety Precautions

PDF download Download Article
  1. Ideally, make thermite in a laboratory equipped with heat screens and ventilation. Making thermite outside is not recommended because wind can carry burning material away from the reaction. Whatever site you choose, make sure there is nothing that can burn within a 4 meter (13.1 ft) radius of the reaction. Make sure that there no metals with low melting points, such as lead, tin, cadmium, or zinc, within a 4 meter (13.1 ft) radius either.[3]
    • Do not make thermite inside your home or garage.
    • Keep children and pets away from the thermite. Never let children do this experiment.
  2. Since you'll be burning metals, the thermite fire can burn through a lot of substances, including thick metals. Ceramics, such as clay flower pots, can hold the fire without melting.[4]
    • Look online for ceramics labeled as having a high heat point. Remember, thermite burns at 2,200 °C (3,990 °F).
    • Even ceramics can break from excess heat. Stand back once the reaction starts in case the container breaks, spreading burning material.
    Advertisement
  3. In addition to being extremely hot, thermite emits UV radiation that can damage your vision. A welding mask provides the best protection because it's designed for use with burning metals, such as thermite.[5]
    • Do not look into the flame directly. Use a welder's mask or welder’s glasses. Looking at the flame directly could cause permanent eye damage.
    • If you don't have a welding mask, wear a pair of dark sunglasses with full UV protection. However, the thermite can still damage your eyes if you look at it directly.
  4. Put on safety gear, including gloves and a fireproof apron. Choose a pair of sturdy, heatproof gloves, and make sure the fireproof apron covers your whole body. Wear thick sleeves, pants that cover your exposed skin, and close-toed shoes.[6]
    • Thermite is very dangerous, so protective gear is essential.
    • Take precautions to prevent your clothing from catching fire. Burning clothing is difficult to remove and can cause severe burns.
  5. Advertisement
Part 2
Part 2 of 2:

Making the Thermite

PDF download Download Article
  1. Use powdered iron oxide, aluminum powder, and a strip of magnesium. Choose finely powdered iron oxide so that it reacts easily with the aluminum, forming thermite. Make sure the magnesium strip is very thin so that it burns easily and ignites the material. For a basic thermite experiment, you'll need 3 grams of aluminum powder and 9 grams of iron oxide.[7]
    • Do not try to grind up the metals into powder yourself, as this is dangerous. Buy them in jars from a chemical company or online. Aluminum powder can also be obtained from a paint store or even an Etch-a-Sketch.
  2. Dry out your iron oxide in an oven or over a Bunsen burner. Set the oven on a medium temperature, such as around 200 °F (93 °C). Heat the iron oxide for 1 hour. If you're using a Bunsen burner, place the iron on an evaporating dish over the flame for 1 hour.[8]
    • Allow the iron oxide to completely cool before you do the experiment.
    • Use caution when using a bunsen burner. The open flame is a fire risk. Never leave it unattended. When you’re finished, make sure the gas supply is shut off completely.
  3. Add 3 grams of aluminum powder and 9 grams of iron oxide. Swirl the metals together or shake them between 1 piece of paper and another. Continue to blend until they are fully mixed.
    • If you increase the quantity of the metals, stick to a 1:3 ratio (by mass) of aluminum to iron oxide. But don’t work with larger amounts until you’re experienced in working with thermite, since this experiment is very dangerous.
    • Never mix them in a metal container, as this can contaminate the project or cause an unwanted reaction.[9]
  4. Pour the mixture into a ceramic container, such as a clay flower pot. Ceramics are less likely to melt with the heat of the thermite. It's best to place the ceramic container into a second ceramic container, in case the first one shatters from the heat.[10]
    • Do not light thermite on an ice block, as it may cause a dangerous explosion. Ice is not an option for controlling the heat of the flame.
  5. Make sure that your magnesium strip is at least 6.5 cm (2 inches) long.[11]
    • Use a longer magnesium strip to give yourself time to step back before the thermite ignites.
  6. Light the magnesium strip with a propane torch or stick lighter. Stand at least 4 meters (13 feet) away from the thermite to watch the reaction.[12]
    • Use sparklers to light the thermite if you don’t have magnesium available.
    • Keep your safety gear, especially your eye protection, on at all times.
    • Do not use matches to light the magnesium strip (or sparkler) since matches could drop burning material into the thermite, causing it to ignite while you are standing next to it.
  7. Remember: a thermite reaction is irreversible once it starts. Don’t try to extinguish it using water. This could cause an explosion.[13]
    • Keep a fire extinguisher nearby in case of secondary fires.[14] You cannot use a fire extinguisher to put out the reaction itself, but you can use it to prevent fire from spreading to other areas once the reaction has stopped.
  8. Advertisement

Community Q&A

Search
Add New Question
  • Question
    What can you use Thermite for?
    ChemGenius
    ChemGenius
    Community Answer
    Making iron nodes. It used to be used to weld train tracks together. The military uses it to quickly destroy valuable information or equipment in a hurry during war.
  • Question
    Is it possible to use aluminum oxide instead powdered aluminum?
    Community Answer
    Community Answer
    No. Thermite is an oxidation of the aluminum powder to aluminum oxide and a concurrent reduction of the iron oxide powder to iron. The aluminum and iron oxidation and reduction, respectively, form the two half cells of the thermite redox reaction. If you start with aluminum oxide and iron, you have the stable products after a thermite reaction, not the unstable reagents needed to make a thermite reaction.
  • Question
    Can the thermite reaction cause an explosion or just cause spontaneous combustion?
    ChemGenius
    ChemGenius
    Community Answer
    For iron thermite, it burns violently. If you replace the iron oxide with copper oxide it explodes. A thermite mixture made from iron oxide & alumimium powder mixed together can explode for no reason.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Video

Tips

Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!

Warnings

Advertisement

Things You'll Need

About This Article

Bess Ruff, MA
Co-authored by:
Environmental Scientist
This article was co-authored by Bess Ruff, MA and by wikiHow staff writer, Johnathan Fuentes. Bess Ruff is a Geography PhD student at Florida State University. She received her MA in Environmental Science and Management from the University of California, Santa Barbara in 2016. She has conducted survey work for marine spatial planning projects in the Caribbean and provided research support as a graduate fellow for the Sustainable Fisheries Group. This article has been viewed 1,510,040 times.
105 votes - 91%
Co-authors: 49
Updated: November 9, 2024
Views: 1,510,040
Categories: Making Chemicals
Article SummaryX

To make thermite you’ll need powdered iron oxide, aluminum powder, and a thin strip of magnesium. Mix the aluminum and iron oxide powder together in a 27:80 ratio by weight, and pour the mixture into a cast iron container. Insert your magnesium strip, and then light it. Make sure you wear a welding mask, sturdy gloves, and sleeves during the process. To learn more about the safety precautions required before you make thermite, continue reading the article below!

Did this summary help you?

Thanks to all authors for creating a page that has been read 1,510,040 times.

Reader Success Stories

  • John D.

    John D.

    Jul 3

    "Thank you for this guide, I no longer need to deal with random dogs popping on my front lawn. The copper version is..." more
    Rated this article:
Share your story

Did this article help you?

Advertisement