Download Article
Download Article
X
wikiHow is a “wiki,” similar to Wikipedia, which means that many of our articles are co-written by multiple authors. To create this article, volunteer authors worked to edit and improve it over time.
This article has been viewed 122,655 times.
Learn more...
When troubleshooting an issue with your iPod, it's sometimes helpful to manually put it into Disk Mode.
Steps
-
Before placing the iPod into disk mode, you should verify that it is charged.
-
Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.)Advertisement
-
Press and hold the Menu and Select buttons for at least 6 seconds until the Apple logo appears.
-
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
-
Connect the iPod to your computer; the screen on the iPod will change and say "Do not disconnect".
Advertisement
-
Before placing the iPod into disk mode you should verify that it has a charge.
-
Toggle the Hold switch on and off. (Set it to Hold, then turn it off again.)
-
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod all your music and data files are saved, but some customized settings may be lost.
-
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
-
Connect the iPod to your computer; the screen on the iPod will change and say "Do not disconnect".
Advertisement
Expert Q&A
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement
Tips
-
If you are having difficulty putting the iPod model into disk mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center.Thanks
-
If you are still unable to put your iPod with a Click Wheel into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.Thanks
Submit a Tip
All tip submissions are carefully reviewed before being published
Name
Please provide your name and last initial
Thanks for submitting a tip for review!
Advertisement
Warning
- To return it to its normal operating state, you will have to reset iPod.
About This Article
Thanks to all authors for creating a page that has been read 122,655 times.
Is this article up to date?
Advertisement