How to Get Mold Out of Shower Caulking

Download Article

A guide to killing moldy caulk with bleach, ammonia, vinegar & more

Co-authored by Ashley Matuska and Devin McSween

Last Updated: July 24, 2024 Fact Checked

Download Article

Bleach

|

Ammonia

|

Non-Toxic Alternatives

|

Prevention

|

Q&A

|

Warnings

|

Things You'll Need

You step into your bathroom to take a hot, relaxing shower when you notice mold growing around the caulk. It might seem like a chore to get rid of all the unsightly mold, but luckily removing it from caulk is easy. In this simple guide, we’ll show you how to wipe away moldy caulk with bleach, ammonia, or common household ingredients like vinegar, baking soda, and hydrogen peroxide. Be sure to never mix bleach and ammonia together or use them with other cleaning products as they can produce harmful gasses.^{[1]
X
Trustworthy Source

Centers for Disease Control and Prevention
Main public health institute for the US, run by the Dept. of Health and Human Services

Go to source} If you’re ready to get rid of nasty, moldy caulk for good, read on!

Things You Should Know

Scrub the caulk with bleach diluted in water to kill and remove mold.
Alternatively, spray the mold with white distilled vinegar and let it sit for 1 hour.
Ammonia, baking soda, and hydrogen peroxide are also great options for cleaning moldy caulk.

Method 1

Method 1 of 4:

Using Bleach

Download Article

Ventilate the bathroom and put on a respirator mask and gloves. Chlorinated bleach creates harsh fumes when you use it, so open the bathroom door, any windows, and turn on the exhaust fan if you have one. Then, protect yourself by putting on a respirator mask and a pair of gloves.^{[2]
X
Trustworthy Source

Centers for Disease Control and Prevention
Main public health institute for the US, run by the Dept. of Health and Human Services

Go to source}
Move outside or into a well-ventilated room, like your kitchen, and open the doors or windows. Then, measure 1 cup (240 ml) of chlorinated bleach and pour it into 1 gallon (3.8 L) of water.^{[3]
X
Trustworthy Source

Centers for Disease Control and Prevention
Main public health institute for the US, run by the Dept. of Health and Human Services

Go to source}

Advertisement
3
Soak a sponge in the bleach solution and scrub the mold if it’s light. If you’re only dealing with a minor case of moldy caulk, simply grab a fresh scrubbing sponge. Soak it in your solution and squeeze out the excess. Then, use it to scrub the caulk and remove the mold.
- Black mold looks gross, but it’s not any more dangerous than other molds. Sneezing and coughing are the most common symptoms of exposure to black mold, though people who are allergic to mold might develop an allergic reaction.^{[4]
  X
  Trustworthy Source
  
  Cleveland Clinic
  Educational website from one of the world's leading hospitals
  
  Go to source}
If a sponge doesn’t remove the mold by itself, fill a spray bottle with your bleach solution. Then, spray the moldy caulk. Give the bleach 5 to 10 minutes to soak in, then scrub the caulk with your sponge.^{[5]
X
Research source}
If a sponge still isn’t removing the mold, spray the caulk again. Just let the bleach spray soak into the caulk for 5 to 10 minutes. Then, scrub the caulk with a soft-bristled brush or toothbrush.^{[6]
X
Research source}
6
Soak the caulk with cotton balls overnight to kill deep-rooted mold. If spraying the caulk doesn’t seem to penetrate the mold, soak cotton balls or toilet paper in the bleach solution. Then, place the cotton balls along the caulk line wherever the mold is growing. Leave them on the caulk for several hours or overnight so the bleach has plenty of time to seep into it.^{[7]
X
Research source}
- In the morning, wipe the caulk down with a damp cloth or sponge.
Give the caulk in your tub or shower one last spray of the bleach solution. Instead of wiping it up, let it stay in place. Leaving the bleach on the caulk helps stop new mold from growing.^{[8]
X
Research source}

EXPERT TIP

Ashley Matuska
Professional Cleaner
Ashley Matuska is a Professional Cleaner at the Founder and Owner of Dashing Maids in Denver, Colorado. Ashley has over seven years of experience in the cleaning industry. She and her team specialize in offering sustainable deep cleaning and maintenance cleaning services. She received a BS in Biology and Sociology from Indiana University.

Ashley Matuska
Professional Cleaner

Clean your shower regularly and dry it after each use to prevent mold from growing. Ashley Matuska of Dashing Maids says: "Bleach is excellent for killing mold, and it can often turn faded and discolored grout back to its original color. In the future, though, the best thing you can do is to be diligent about cleaning on a regular basis. If the mold is growing in the shower area, dry the walls and the door of your shower every time you use it, because mold can build up very quickly."

Method 2

Method 2 of 4:

Using Ammonia

Download Article

1
Ventilate the bathroom. Ammonia can have harmful effects when you inhale it, so improve the air circulation in your bathroom as much as possible. Open any windows, prop open the door, switch on the exhaust fan, and even set up a standing fan to get the air moving.
- Warning: ammonia and bleach create toxic fumes when they are mixed. If you’ve already sprayed the caulk with bleach, do not follow it up with ammonia.^{[9]
  X
  Trustworthy Source
  
  Centers for Disease Control and Prevention
  Main public health institute for the US, run by the Dept. of Health and Human Services
  
  Go to source}
Put on a respirator mask, gloves, and goggles. To add an extra layer of protection, filter out the ammonia fumes with a respirator. Just choose an activated charcoal cartridge respirator that’s designed for ammonia use and seal it snugly to your face. Then, put on a pair of gloves and goggles to protect your hands and eyes from the ammonia, too.^{[10]
X
Research source}
Move outside or into a room in your home that gets good airflow, like your kitchen. Then, mix together equal parts of ammonia and water directly into a spray bottle. Or, combine them in a bowl and then pour the solution into a spray bottle with a funnel.
4
Spray the caulk, wait 5-10 minutes, then scrub it with a brush. Evenly coat the moldy caulk with the ammonia solution. Let it sit for 5 to 10 minutes to give it time to work its magic and kill the mold. Then, scrub the solution into the caulk with a soft-bristled brush like a toothbrush or a scrubbing sponge.^{[11]
X
Research source}
- Wipe the caulk down with a damp cloth or sponge to remove all traces of the ammonia solution when you’re finished.
5
Apply the ammonia again if the caulk is still moldy. Ammonia is an effective mold killer, but it sometimes takes extra effort for it to remove mold on porous surfaces like caulk. Simply spray the caulk again if your first application of the ammonia solution didn’t kill or remove all the mold.^{[12]
X
Research source}
- If you still see mold, move on to one of the non-toxic cleaning options in the steps below.
While ammonia typically removes the mold on the surface of the caulk, the mold might be embedded deep within the caulk. If the mold reappears soon after you clean it, use one of the other solutions below to remove it.^{[13]
X
Research source}

Method 3

Method 3 of 4:

Using Non-Toxic Mold Killers

Download Article

1
Soak the caulk in white distilled vinegar for 1 hour. Simply fill a spray bottle with vinegar. Spray it onto the moldy caulk and let it soak in for 1 hour. Then, wipe the mold away from the caulk with a damp sponge or cloth and rinse the area with water.^{[14]
X
Research source}
- White vinegar also helps prevent mold. After you take a shower or bath, spray the caulk and the surrounding area with vinegar.
- Vinegar can soften and pull up silicone caulk, so don’t leave it on for much longer than 1 hour. Then, scrub the caulk very gently to prevent any damage.^{[15]
  X
  Research source}
2
Mix baking soda with water and spray it on the caulk. Pour 1 tablespoon (17 g) of baking soda and 2 cups (473 ml) of water into a spray bottle. Shake up the bottle to mix the ingredients. Then, spray the mold on the caulk and scrub it clean with a sponge or soft brush. Simply rinse the caulk with water and spray it with the solution again to stop the mold from growing back.^{[16]
X
Research source}
- Or, mix 1 part baking soda with 1 part water to create a paste. Spread the paste onto the caulk and let it sit for 30 minutes, or until it dries out. Then, scrub the baking soda with a sponge or brush.
Fill a spray bottle with 3% hydrogen peroxide and spray the moldy caulk until it’s thoroughly soaked. Then, let the cleaner soak into the caulk for about 10 minutes. Scrub the caulk with a sponge or a soft-bristled brush to lift and remove the mold. Just wipe the caulk down with a damp cloth or sponge when you’re finished scrubbing.^{[17]
X
Research source}
Clean moldy caulk with a borax and water solution. Add 1 cup (204 g) of borax to 1 gallon (3.8 L) of water in a bowl or container. Then, soak a scrubbing sponge in the solution and rub it into the mold on the caulk. Or, fill a spray bottle with the borax solution. Spray the caulk, scrub the borax in with a brush, and then wipe it clean with a damp cloth.^{[18]
X
Research source}
5
Remove the old caulk if the mold won’t budge. Sometimes mold grows behind the caulk or is too ingrained inside it for regular cleaning solutions to remove it. To take out your old caulk, slice the edges with a utility knife or razor. Then, push the edge of a putty knife between the caulk and the shower or tub wall to gently pry it off. Spray and scrub the area with 1 cup (240 mL) of bleach mixed in 1 gallon (3.8 L) of water. Then, dry the shower or tub before you recaulk it.^{[19]
X
Research source}
- If the caulk is too hard to pry up at first, heat it with a heat gun or hair dryer to soften it. Or, spray it with a caulk remover.

Method 4

Method 4 of 4:

Preventing Mold

Download Article

1
Turn on your bathroom’s exhaust fan when you take a shower. Mold thrives in hot, humid environments, so improve your bathroom’s ventilation and airflow as much as you can. If you have an exhaust fan, turn it on when you start showering and keep it on for at least 30 minutes after you’re done.^{[20]
X
Research source}
- If you don’t have an exhaust fan, put a dehumidifier in your bathroom to absorb moisture, or a standing fan to circulate more air.
- If you have a shower with a glass door or walls, use a squeegee to remove excess water each time you bathe.
- Dry any areas in your bathroom where mold tends to develop to prevent future growth.
2
Clean your shower or bathtub weekly and give it a deep clean monthly. To keep your shower in pristine, mold-free condition, wipe it down once a week with a commercial shower cleaner or your own mix of 1 part white vinegar and 1 part water. Then, give it a deep cleaning once a month, spending extra time scrubbing the caulk, grout lines, and shower head.^{[21]
X
Research source}
- If you have a glass shower, wipe the glass walls with a glass cleaner.
Spray caulk with vinegar or a commercial mold killer after each shower. Keep mold at bay in between your weekly cleaning, too. When you get out of the shower, mist the caulk with white vinegar or a shower spray that fights mold. This helps create a harsh environment where not even the toughest mold can grow.^{[22]
X
Research source}
4
Wash your towels and bath mats weekly. Your bath towels and rugs absorb a lot of water, which can keep your bathroom moist and prone to mold if they’re not washed and dried often. So, just make it a habit to throw them in your washing machine about once a week.^{[23]
X
Research source}
- If you have a fabric shower curtain, wash it about once a month.

Community Q&A

Search

Add New Question

Question

The grout in my tub has mold, how do I get rid of the mold behind the grout?

Debra Bish

Community Answer

The mold on grout and caulking can be removed with salt and vinegar. If that doesn't work, rinse well, and try a bleach and water solution - use about a cup of bleach in a gallon of water. Be sure you're wearing rubber gloves and protective eye goggles. Scrub the grout with a scrub brush using the bleach and water.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 10 Helpful 17
Question

Will removing black caulking around tub harm my cat after it's off?

Community Answer

It could. You should always clean up the area thoroughly once you're finished and dispose of the garbage where pets and kids can't reach it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 9
Question

I need to clean/whiten caulk that's been blackened by mold. I can't use bleach or ammonia. Would hydrogen peroxide or white vinegar be effective?

Community Answer

Make a paste of hydrogen peroxide and baking soda. Let it sit for 10 minutes and then scrub with a brush. Wash clean with a wet cloth.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 11 Helpful 24

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Video

Tips

Submit a Tip

All tip submissions are carefully reviewed before being published

Name

Please provide your name and last initial

Submit

Thanks for submitting a tip for review!

Warnings

Always wear appropriate eye and hand protection when using cleaners.

Thanks
Helpful 1 Not Helpful 0
Check the ingredients on store-bought shower and tub cleaners before using them with bleach and other ingredients. Some commercial cleaners contain ammonia.^{[24]
X
Research source}

Thanks
Helpful 0 Not Helpful 0