How to Tie Boating Knots

Co-authored by wikiHow Staff

Last Updated: February 21, 2022 References

A basic knot may be enough to join two pieces of string for a project, but when it comes to boating, you will need to use different kinds of knots. The type of knot you use depends on what you are tying it to and the purpose. For example, you would use one knot for tying an anchor and a different knot for mooring a boat. You should also keep the situation in mind: some knots need to be sturdy, while other knots need to come loose quickly and easily.

Method 1

Method 1 of 5:

Making an Anchor Bend

Download Article

You can then use the rest of the rope to secure the anchor to your boat. It would be a good idea to add a second knot at the end of the rope to use as backup in case the rope slips.^{[1]
X
Research source}
2
Wrap the end of the rope once around the anchor's ring. Feed the end of the rope through the ring on top of the anchor. Wrap the rope around the ring once to make a loop. The end of the rope should now be alongside the rest of the rope.^{[2]
X
Research source}
- Keep the rope loosely wrapped around the ring so that you have a small loop.
Advertisement
Do not lose the shape of the loop around the ring. Point the end of the rope towards the loop.^{[3]
X
Research source}
Pull it just tight enough so that the rope crossing in front of the rest of the rope tightens.^{[4]
X
Research source}
Alternate between tugging on the ropes and shifting the knot around until everything is nice and tight. Make sure that the end of the rope is resting between the anchor's ring and the knot itself.^{[5]
X
Research source}
Wrap the tail end of the rope into a small loop. Feed the end of the rope through the loop, then tug on it to tighten the knot. Repeat this step for the other end of the rope, if desired. You don't have to do this, but it will help prevent the rope from accidentally slipping.^{[6]
X
Research source}

Method 2

Method 2 of 5:

Tying a Bowline Knot

Download Article

1
Use the bowline if you need a strong hold that is easy to untie. The bowline knot also has a loop at the end that you can put around a cleat or post if you need to moor your boat temporarily.^{[7]
X
Research source} The knot tightens under pressure, so it won't untie as long as it is bearing a load.^{[8]
X
Research source}
- Although this knot is secure, do not use it in emergency situations.
Drape the rope across your palm. Wrap the end of the rope to make an O-shaped loop. Make sure that the end of the rope is crossing in front of the rest of the rope.^{[9]
X
Research source}
Take the end of the rope and bring it behind the loop. Pass the end through the loop so that you have a second loop right next to it. The second loop should be big enough for your hand to pass through.^{[10]
X
Research source}
Bring the tail behind the rope, then pull it back down through the first loop that you made. Keep the tail end under the second loop.^{[11]
X
Research source}
Hold onto the rest of the rope and tug on the tail end. You can slide the knot up and down the rope to make the second loop larger or smaller.^{[12]
X
Research source}

Method 3

Method 3 of 5:

Knotting a Cleat Hitch

Download Article

1
Use a cleat hitch if you need to tie your boat to a floating dock. The cleat hitch is both easy to tie and untie. It is also very strong, so it you can use it to firmly secure most watercraft.^{[13]
X
Research source}
- You use the cleat hitch to tie ropes to cleats. Cleats are shaped sort of like T's.
Make a single full wrap around the base of the cleat. The stationary end of the rope should be perpendicular to the cleat. The end you are holding should be parallel to the cleat.^{[14]
X
Research source}
3
Wind the end of the rope around the horns to form a figure eight. Pull the tail end of the rope across the top of the cleat. Wrap it under the first horn, then drag it over the top of the cleat. Wrap it under the second horn.^{[15]
X
Research source}
- Keep the rope between the screws on top of the cleat.
- If the cleat is large, or if the rope will be under a lot of tension, make 2 to 3 more figure eights.
You'll notice that you have rope crisscrossing over the top of the cleat. Find the topmost rope, and pass the end of the rope under it.^{[16]
X
Research source}
Make sure that the tail end is pointing away from the stationary rope.

Method 4

Method 4 of 5:

Knotting a Clove Hitch

Download Article

1
Use the clove hitch if you need something quick. Although the clove hitch doesn't hold as well as other knots, it is quick to tie and untie. It is great for hanging fenders over the side of your sailboat when docking.^{[17]
X
Research source}
- Be aware that the knot can slip if there is no constant pressure on it. The knot can also come loose if the object that it's attached to rotates.^{[18]
  X
  Research source}
Place the rope vertically in front of the bar, handle, ring, etc. with the end pointing up. Bring the end down behind the bar. Pull it under the bar, then back up again.^{[19]
X
Research source}
Bring the rope back down behind the bar again. This time, make sure that it crosses over the rope that is already around the bar. If you were to look down on the bar, you'd see an X-shape formed by the rope.^{[20]
X
Research source}
Pull the rope back under the bar and up the front. Tuck it under the top rope that is forming the X.^{[21]
X
Research source}
Pull one end upward and the other end downward simultaneously. This will cause the knot to shift towards the front of the bar and tighten. The knot will remain tight as long as there is constant tension on the rope.ref>https://www.youtube.com/watch?v=TLVBdF7dPyI&feature=youtu.be&t=25s</ref>

Method 5

Method 5 of 5:

Doing a Figure Eight Knot

Download Article

The figure eight knot has a firm, non-slip loop at the end. It is one of the strongest knots there is and ideal for mooring boats.^{[22]
X
Research source}
Measure 24 inches (61 cm) from the end of the rope, then wrap the rope into a loop. The tail needs to cross in front of the rest of the rope.^{[23]
X
Research source}
Hold the loop in your non-dominant hand. Use your other hand to wrap the tail end of the rope behind the rest of the rope, just under the loop.^{[24]
X
Research source}
Pull the tail end upwards and push it through the loop. Pull upwards on the tail end and downwards on the rest of the rope to tighten the knot.^{[25]
X
Research source}
If you have enough rope leftover, you can use it to retrace your knot. Simply weave the tail around the knot, following the rope that's already there. This will make the knot larger. If you want to, you can leave a loop at the bottom to hook onto things.^{[26]
X
Research source}

Expert Q&A

Search

Add New Question

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

The thickness of the rope you are using depends on the job you are using it for. The greater the tension on the rope, the thicker and stronger the rope should be.

Thanks
Helpful 1 Not Helpful 1
Do not tie knots in ropes that appear to be worn or fraying. Even if the knot holes, the rope may break, which is just as bad as a knot coming loose.

Thanks
Helpful 0 Not Helpful 0
You can use these knots in other situations, not just boating. Many hikers and rock climbers also like to use some of these knots.

Thanks
Helpful 1 Not Helpful 0