A Beginner’s Guide for Using Blending Stumps (Plus How to Make One)

Download Article

Blend values in your drawings with these simple shading tools

Co-authored by Rebecca Schweiger and Hunter Rising

Last Updated: March 26, 2024 Fact Checked

Download Article

Blending Techniques

|

Maintaining Blending Stumps

|

Making a Blending Tool

|

Expert Q&A

|

Tips

If you’re trying to achieve smooth transitions between shadows in your drawings, blending stumps are an invaluable tool to add to your art supplies. These simple stumps of tightly rolled paper are perfect for blending charcoal or graphite to create different values and give your drawings a clean, polished look. No matter how long you’ve been making art, we’ll walk you through how to use and maintain your blending stumps, and how you can make your own with scraps of paper.

Things You Should Know

Rub your drawing with the side or tip of the blending stump to smooth transitions between light and dark values.
Drag your blending stump in a single direction using short strokes to smudge the values and create small details.
Use your blending stump over charcoal or graphite to darken and fill in gaps of paper still showing through.

Method 1

Method 1 of 3:

Trying Different Techniques

Download Article

1
Rub the side or tip of the stump on your drawing to blend tones. If you want to create a smooth transition from light to dark shades, hold your blending stump at an angle. Start by blending areas of light value with the side or tip of the stump and work your way into the darker values to remove rough sketch lines or edges. Keep working the blending stump in small circular movements or short, straight strokes to soften the edges and blend the tones together.^{[1]
X
Research source}
- For example, try drawing a ball and shade it so it’s darker on one side and light on the other. Then, blend the light values into the dark values so the ball looks smooth and rounded.
- If you want to create a soft edge, push down on the tip of the blending stump to dull it. Then drag the tip of the stump across the paper to make the edge.
2
Dab your drawing with the tip of the stump to make detailed smudges. If you just want to soften a portion of your drawing or just blend a small area, push the tip of the blending stump into the charcoal or graphite. Gently move the blending stump in short, straight lines to create soft smudges and blend in hard lines.^{[2]
X
Expert Source

Rebecca Schweiger
Professional Artist & Art School Founder

Expert Interview. 19 November 2021.}
- For example, if you're drawing an eye, smudge the iris so it doesn't appear sharp or lined.
- You can also use short smudges between values to help mimic a woven pattern of fabric.
Variation: Create streaks or patterns by dragging the blending stump from the charcoal or graphite away from it. This will make the charcoal or graphite smear in any direction you like.

Advertisement
3
Spread graphite or charcoal with the stump to add soft shades. Press down with your graphite or charcoal more than you usually would while you’re sketching so a lot of material transfers to the paper. Then, rub the blending stump over the material so the graphite or charcoal transfers onto it. Rub the stump along the blank paper of your drawing to spread a lighter shade of the material and create depth. When your blending stump stops spreading material, rub the stump in the darker shade to keep applying more value to your image.^{[3]
X
Research source}
- For example, if you're drawing someone smiling with their mouth open, you might shade an even layer of a dark shadow inside the mouth and rub it with your blending stump. Then rub the stump near the corners of the mouth to add soft shadows where the skin creases.
4
Rub the stump over thick material to completely darken the space. If you're using charcoal or graphite to draw something that appears black, tiny points of the white paper may still be visible through the shading. Take the side of your blending stump and gently rub it over the charcoal or graphite. The stump will move the material so it fills in the very tiny gaps in the paper.^{[4]
X
Research source}
- If you still see bits of white, try adding more charcoal or graphite before spreading it again with the blending stump.
5
Draw with a dirty blending stump to create softer lines and edges. Instead of smudging or blending charcoal or graphite that's already on your paper, work with a dirty blending stump on clean paper. Apply graphite or charcoal onto a separate piece of paper, and rub the side of your blending stump in it. Then, use the tip and side of your blending stump on a fresh sheet of paper to draw. The dirty stump is already loaded with charcoal or graphite, so it will transfer the material to clean paper.
- For example, if you'd like to draw a wispy cloud or a shadow, use the blending stump as though it were your charcoal or pencil. Rub firmly to get the darkest shade, and reduce pressure when you want to have a lighter tone on your image.

Method 2

Method 2 of 3:

Maintaining Blending Stumps

Download Article

1
Wipe the blending stump on scrap paper to remove excess graphite. After using your blending stump, it will turn dark and hold onto the graphite or charcoal from your drawing. Rub the blending stump on a spare sheet of paper every few minutes to prevent it from dropping charcoal or graphite onto your paper.^{[5]
X
Research source}
- The excess graphite or charcoal will transfer to the scrap paper instead of your drawing.
2
Rub the blending stump against fine-grit sandpaper to clean it. After a few uses, your blending stump will darken as it's loaded with more charcoal or graphite. Lay a piece of fine-grit sandpaper down with the abrasive side up. Rub the tip of the blending stump against the sandpaper until you remove all the darkened areas and reveal a clean layer of paper.^{[6]
X
Research source}
- You may try using coarse-grit sandpaper to clean your blending stump more quickly, but it may fray the edges.
Tip: Try using a nail file if you need to lightly clean your blending stump. A nail file may be easier to handle than a sheet of sandpaper.
3
Sharpen the tip of the stump with a craft knife. When the tip of the blending stump gets dull or flattens out, hold the tip against a cutting board so it points away from you. Carefully cut the end of the tip with the craft knife, moving the blade away from you. Continue slicing off the end of the stump until it comes to a sharp point at the end. Toss all the pieces you cut off into the trash.^{[7]
X
Research source}
- Work slowly so you don’t accidentally cut yourself.
4
Clip frayed tips with a nail clipper. As you use your blending stump, the tips and sides of the may fray and tear apart. Take a pair of nail clippers and trim the frayed ends as close to the blending stump as you can.
- Alternatively, slice off the fraying ends with a craft blade. Work slowly, hold the blending stump steady, and move the blade away from your body so you don't cut yourself.
5
Use different blending stumps based on the drawing material. If you rely on just 1 blending stump, it will become dirty faster and wear out quickly. Instead, alternate between 2 or 3 blending stumps depending on what drawing medium you’re using and what colors you were blending.^{[8]
X
Research source}
- For example, use 1 blending stump for dark values. Since you don’t want to smudge lighter areas of your drawing, use a different stump for the light or medium values.
- When you need to blend tight detailed areas of a drawing, use a tortillon with a finer point instead of a blending stump.

Method 3

Method 3 of 3:

Making a Blending Tool

Download Article

1
Cut a piece of paper diagonally 1 in (2.5 cm) from the corners. Measure 1 in (2.5 cm) down one side of your paper. Then, flip your paper and measure 1 in (2.5 cm) down on the opposite side. Draw a line between the 2 points with a ruler and use a pair of scissors to cut along the line.^{[9]
X
Research source}
- A standard sheet of paper makes 2 blending stumps.
Start on the shortest side and tightly roll the paper to start making your blending stump. Slowly continue to roll the paper until you reach the opposite side. Pinch the edge of the paper once you finish rolling it so it doesn’t come undone.^{[10]
X
Research source}
3
Stick a toothpick inside of the roll to form a point on the stump. Poke into one end of the tightly rolled paper with your toothpick. As you push the paper, it will naturally form into a pointed rip on the other end. Once the stump forms into a solid tip, take out the toothpick.^{[11]
X
Research source}
- If you don’t have a toothpick, try poking the paper with the tip of a pencil.
Rip a few short strips of tape off the roll and wrap it around the base of your drawing stump. Place another strip along the loose edge of the paper to hold it down.^{[12]
X
Research source}
5
Sharpen the end of the stump with a craft knife. Point the tip of the blending stump away from you, and cut away the outer layers of the stump. Continue slicing layers of paper off the stump until it forms a sharp tip. Once you’re finished, you’re ready to use it for shading your drawings.^{[13]
X
Research source}
- Whenever your blending stump gets dirty or dull, re-sharpen it with your craft knife again.

Expert Q&A

Search

Add New Question

Question

Do you really need blending stumps?

Rebecca Schweiger
Professional Artist & Art School Founder
Rebecca Schweiger is a Professional Artist, Published Author, and the Founder of The Art Studio NY, New York City's #1-rated art school and global online art studio. Celebrated by TV networks, press, and celebrities including NBC, ABC, E!, Time Out New York, The Kardashians, and Big Bang Theory's Jim Parsons, Rebecca specializes in creating abstract artwork and teaching studio art classes. Her art studios provide 100+ weekly, beginner-friendly drawing and painting art classes to people around the globe. With more than 22 years of art experience, she is the author of Release Your Creativity: Discover Your Inner Artist with 15 Simple Painting Projects, and her artwork has been exhibited in more than 50 museums and galleries around the world. Rebecca holds a BFA in Painting from Boston University's School for the Arts and has participated in acclaimed artist residencies worldwide.

Rebecca Schweiger

Professional Artist & Art School Founder

Expert Answer

Although you don't need them, a blending stump is a terrific tool for drawing for beginners and artists at any level!

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 6 Helpful 12
Question

Can you use a blending stump with colored pencils?

Rebecca Schweiger
Professional Artist & Art School Founder
Rebecca Schweiger is a Professional Artist, Published Author, and the Founder of The Art Studio NY, New York City's #1-rated art school and global online art studio. Celebrated by TV networks, press, and celebrities including NBC, ABC, E!, Time Out New York, The Kardashians, and Big Bang Theory's Jim Parsons, Rebecca specializes in creating abstract artwork and teaching studio art classes. Her art studios provide 100+ weekly, beginner-friendly drawing and painting art classes to people around the globe. With more than 22 years of art experience, she is the author of Release Your Creativity: Discover Your Inner Artist with 15 Simple Painting Projects, and her artwork has been exhibited in more than 50 museums and galleries around the world. Rebecca holds a BFA in Painting from Boston University's School for the Arts and has participated in acclaimed artist residencies worldwide.

Rebecca Schweiger

Professional Artist & Art School Founder

Expert Answer

For sure! Just gently press your blending stump onto your paper and it will smooth out and blend the colored pencil as needed as you would with a drawing pencil..

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 2 Helpful 14
Question

Is size #8 the largest? I would love a 1 inch size blending stump!

Community Answer

You can make your own, by rolling up paper tightly and even shape it using sandpaper. You don’t use glue, just tape up one end to secure it.

Thanks! We're glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow
Yes No

Not Helpful 1 Helpful 5

See more answers

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Tips

Blending stumps don’t work very well with colored pencils. Consider using a colorless pencil blender instead.^{[14]
X
Research source}

Thanks
Helpful 0 Not Helpful 0
If you don’t have a blending stump, try using cotton swabs, paper, facial tissue, felt, or chamois instead to create smooth textures in your drawing.^{[15]
X
Research source}

Thanks
Helpful 0 Not Helpful 0